ERICSSON - секреты

Ericsson 388
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries).
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)

Ericsson DH-3xx/vi
Secret Codes
923885[Menu] --- NAM programming
904060[Menu] --- Reset phone
904080[Menu] --- Title blink
904090[Menu] --- TestMode on/off
904059[Menu] - Test Set (commands)
(0..9=0..9 *=A; #=B; clr=C; menu=D; no=E; rcl=F).
press Yes, at the @ enter the command. some of the commands have parameters of different lenght. if one parameter doesnt work try another.

Ericsson SH888
*#06# показывает IMEI (International Mobile Equipment Identity) код:
>*<<*<* показывает версию ПО
>*<<*<*>>> информация о версии IR. Если нажать YES вы сможете проверить версию драйвера
The Service Provider (SP) Lock опция используемая для привязки телефона к определенной
SIM карте. При этом если вставить карту другого оператора, то телефон откажется
работать, но карта того же оператора подойдет.

Для того что бы активировать/деактивировать режим блокировки необходим специальный
секретный код который не доступен конечному пользователю

Как включить данный режим :
<**< Lock to Network? если нажать yes то у вас будет 5 попыток для ввода NCK кода.
<**<< Lock to Network subset? если нажать yes то у вас будет 5 попыток для ввода NSCK кода.
Предупреждение : Ваш телефон может быть заблокирован навечно если был 5 раз введен неправильный код.
Меню будет деактивировано, и на любые попытки ввести NCK/NSCK код вы получите "Not allowed"!.
Возможно, что переписать NCK/NSCK код получится только после полного стирания EEPROM.

Быстрый набор последнего звонка...
Если вы по каким либо причинам не хотите набирать 'Last Dialed calls menu' вы можете вместо этого использовать следующее:
сначала нажать '0' , затем '#'.

Доступ в меню без Sim карты ...
Для того что бы войти в меню без вставленной карты напечатайте **04*0000*0000*0000#
Когда на дисплее появится "Wrong Pin" (неправильный Pin код) нажмите NO и у вас
есть доступ ко всем меню: Info, Access, Settings, Calculator, Clock, Keylock On?,
Mail, Phone book.

Примечание: Если вы попробуете это на GH688 то ваш телефон может выдать Keylock
On? меню и вы должны будете вытащить батарею для того что бы включить телефон

Индикатор заряда батареи в выключенном телефоне ...
Когда телефон выключен и не заряжается вы можете посмотреть заряд батареи кратковременно
нажав на клавишу 'NO' и подождать 2 секунды . После чего индикатор будет показан
в своей обычной позиции

Ericsson T28s
*#06# показывает IMEI (International Mobile Equipment Identity) код
*#0000# устанавливает меню на Английский
*#3370# устанавливает Enhaced Full Rate (режим улучшающий качество звука)
#3370# выключает Enhaced Full Rate
*#9000# для ввода SIM lock кода
*#9001# для ввода corporate lock кода (Bosch 908)
*#9002# для ввода provider lock кода (Bosch 908)
*#9003# для ввода network lock кода
*#9004# для ввода subset lock кода
*#9100# для снятия SIM lock кода
*#9101# для снятия corporate lock кода
*#9102# для снятия provider lock кода
*#9103# для снятия network lock кода
*#9104# для снятия subset lock кода
*#3262255*8378# (*#DANCALL*TEST#) для открытия секретного Инженерного меню (меню 10)

10. Engineering
10.1 MS Info
10.1.1 on
10.1.2 off
10.2 Software details
10.2.1 Software version
10.2.2 EEPROM version
10.2 Test / Production details
10.3.1 Hardware data
10.3.2 Production data
10.3.3 Service data
10.3.4 Mechanical data

>*<<*<* - показывает номер и дату выпуска версии программирования
>*<<*<*> - выбор языка?
>*<<*<*>> - выбор языка?

Ericsson GA628
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
*#103# then YES Time and date will be shown.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)
Software UPDATED / NEW
The phone should display something similar to this:
CXC125065 - Cell phone's internalproduct code.
PRG - Firmware revision - software version (date & time stamp).
970715 1515
LASTEST Version is: <990401>
Fixes: ???
Software update, how?
I have been asked a lot about how to update the software in cellular phones. The easiest thing to do is to go to the nearest Ericsson
dealer and make him do it for you. Just remember that it is supposed to be free (a receipt is requiet) so don't let him tell you anything else!
Service Provider Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)
Here is how to activate the menu:
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Tips and Info Shortcut for Last Dialed call menu...
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead:
First '0' then '#'.
Bat. level indicator when turned OFF...
When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.
Access menu without Sim card ...
To access to the menu in your phone without having a card inside do the following:
type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book.
NOTE if you try this on your phone may stop at Keylock On? menu and you?ll have to take your battery out to turn the phone on again.
Alarm Clock Menu..
Go to MissedCall
Empty the list
Press the -> key for a second or two
The option Menu size turns up
Choose 'yes' and go from there.
An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone. Free phone calls using the GA628..NB! This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions. The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)...
if it can be traced? - I don't know...
Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out:
Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone.
You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE
phone calls in some countries.. we hope!!
Another variant of the code ..
Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.
If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???

Ericsson GH688
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)
Software
The phone should display something similar to this:
CXC125065 - Cell phone's internalproduct code.
PRG - Firmware revision - software version (date & time stamp).
970715 1515
LASTEST Version is: <980114>
Fixes: ???
Fixes in Software version<971009>
After receiving an SMS the prompt >>Message read?<< stayed on the screen until you pressed YES or NO. This new software eliminated
this "feature" and when you receive an SMS >>Message read?<< stays on the screen only for a few seconds then it changes into an envelope.
Fixes in Software version <970905> (and Ericsson 788 - software version 970716)
The error is described as "MS unable to find HPLMN if 30 or more competitor ARFCN+s have greater signal strength than the HPLMN."
In other words:
if there are 30 or more channels belonging to other carriers which are stronger than the customer's home network, the phone will not be able to find the customer's home network.
Fixes in Software version <970715>
- The bug of the missing arrow on display when all diverting active.
- Key lock key on display turned around , like in manual. (???)
- An updated GSM operators' list.
- Better and more solid reception.
- Changing problem when turned OFF.
Software update, how?
I have been asked a lot about how to update the software in cellular phones. The easiest thing to do is to go to the nearest Ericsson dealer and make him do it for you. Just remember that it is supposed to be free (a receipt is requiet) so don't let him tell you anything else!
Service Provider Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)
Here is how to activate the menu:
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Tips and Info UPDATED / NEW
Shortcut for Last Dialed call menu...
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'. Bat. level indicator when turned OFF...
When the gh688 is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.
Access menu without Sim card ...
To access to the menu in your phone without having a card inside do the following:
type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book.
NOTE if you try this on the GH688 your phone may stop at Keylock On? menu and you?ll have to take your battery out to turn the phone on again.
Full Network Name...
You can see the Full Network Name by doing the following:
Go to the network menu, when the phone displays the networks available (in 'Select net' and 'Edit list' menu) you can press * and you will see the full name.
Full Operator List...
You can view the full operator list by doing the following:
Go to the 'Edit list' menu under 'networks'. The phone say 'please wait' (searching for other networks). When finished, Press the < key once, then YES twice. Now the phone displays the full list. Browse through the list with the < > keys.
Monitor mod on Ericsson GH688..
How to enable net monitor on Ericson 688..(Let me know from you if your try this.. Haven't got a 688 anymore ;( )
1. Remove SIM from phone
2. Dial 112, press YES, hear something,
3. Dial 112YESNO
4. Press <(left arrow) before SETTINGS
5. Then YES, <(left arrow), then u will see NM on?
6. press YES
Free phone calls using the GH688..
NB! This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)...
if it can be traced? - I don't know...
Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out:
Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone.
You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!
Another variant of the code ..
Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone. If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...??? (Please tell me otherwise!!)
Pin Outs
Bottom view, keyboard up, counting from the left:
01 Out Audio from Mobile Station
02 In Audio to Mobile Station
03 In External Analog Audio Accessory Sense. Connect to GND to enable external mike and speaker
04 - Audio Signal Ground, 0V reference
05 In Portable Handsfree.
06 Out Music Mute (to mute e.g. the car radio) High when calling.
07 In Flash Memory Voltage and Service Voltage. Phone enters debugmode when tied to +5V at power-up.
08 Out Logic Reference, Status On. Sources over 100mA.
09 Out Data from Mobile Station. Debug messages appear here at 112KBaud when in debug mode.
10 GND Digital Ground and DC return
11 In Data to Mobile Station
12 I/O DC positive for battery charging (in)/DC for extenal accessory powering (out)
All signals seem to be at 5V logic. Most debug messages are text. Like "CB ok!" etc. Debug messages are trailed by 0x0A, 0x0D. Power-up means removal of battery, reconnection of battery, depressure of "NO".
A portable handsfree kit is connected as follows:
Portable Handsfree (directly connected to pins 01, 02, 04):
01 Earphone: 16 Ohm
02 Microphone: <= 2 kOhm
05 to be connected to 04 (GND)

Ericsson SH888
*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>>> IR version info. if pressing yes you can check the phones IR device's driver version.
Software
The phone should display something similar to this:
CXC125131- Cell phone's internalproduct code.
PRG - Firmware revision
970715 1515 - software version (date & time stamp).
LASTEST Version is: <991022>
Older versions:
<990614>
CXC125131
PRG
990614 1714
IVER
980408 1035
PRGCXC125101
Software update, how?
I have been asked a lot about how to update the software in cellular phones. The easiest thing to do is to go to the nearest Ericsson dealer and make him do it for you. Just remember that it is supposed to be free (a receipt is requiet) so don't let him tell you anything else!
Service Provider Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)
Here is how to activate the menu:
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Tips and Info
Shortcut for Last Dialed call menu...
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'. Bat. level indicator when turned OFF...
When the gh688 is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.
Access menu without Sim card ...
To access to the menu in your phone without having a card inside do the following:
type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book.
NOTE if you try this on the SH888 your phone may stop at Keylock On? menu and you?ll have to take your battery out to turn the phone on again.

Ericsson GF768
Редактирование приветствия.
1. Войдите в Keylock меню.
2. Установите блокировку в Auto.
3. Нажмите YES затем удерживайте Левую стрелку пока не появится Greetings меню.

GF788 меню в вашем GF768 телефоне! (1)
1. Войдите в EDIT Меню и нажмите YES.
2. Нажмите число "2" затем YES.
3. В "NAME" удерживайте клавишу "2" пока не появится число "2". Нажмите YES.
4. Нажмите YES еще раз (для сохранения позиции ) затем БЫСТРОнажмите и удерживайте левую стрелку пока на дисплее не появится "SIZE".
5.Нажмите YES и выберите "Full size". Теперь у вас будет меню как и в GF788 .

GF788 меню в вашем GF768 телефоне! (2)
1.Войдите в MissedCall
2. Очистите список
3. Нажмите Правую стрелку -> на пару секунд
4. Появится SIZE меню
5. Выберете YES и выйдете от туда
Примечание . Данный код работает с версией 990122.

GF788 меню в вашем GF768 телефоне! (3)
1. Войдите и установите громкость звонка и нажмите YES.
2. Когда 'STORED' появится - удерживайте нажатой правую стрелку пока на экране не появится 'Extended Menu'
3. Выберете "Activate" в меню
Примечание . Данный код работает с версией 980910.

Ericsson GF788
*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)
Software
The phone should display something similar to this:
CXC125065 - Cell phone's internalproduct code.
PRG - Firmware revision - software version (date & time stamp).
970715 1515
LASTEST Version is: <971128>
Fixes: ???
Software update, how?
I have been asked a lot about how to update the software in cellular phones. The easiest thing to do is to go to the nearest Ericsson
dealer and make him do it for you. Just remember that it is supposed to be free (a receipt is requiet) so don't let him tell you anything else!

Service Provider Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)
Here is how to activate the menu:
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your phone can be locked to a service provider FOREVER by doing this!
If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Tips and Info Shortcut for Last Dialed call menu...
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'. Bat. level indicator when turned OFF... When the gh688 is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

Access menu without Sim card ...
To access to the menu in your phone without having a card inside do the following:
type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book.
NOTE if you try this on the GH688 your phone may stop at Keylock On? menu and you?ll have to take your battery out to turn the phone on again.
Free phone calls using the GF788..
NB! This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.
The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)...
if it can be traced? - I don't know...
Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out:
Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!

Another variant of the code ..
Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone. If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...??? (Please tell me otherwise!!)
Pin Outs
Bottom view, keyboard up, counting from the left:
01 Out Audio from Mobile Station
02 In Audio to Mobile Station
03 In External Analog Audio Accessory Sense. Connect to GND to enable external mike and speaker
04 - Audio Signal Ground, 0V reference
05 In Portable Handsfree.
06 Out Music Mute (to mute e.g. the car radio) High when calling.
07 In Flash Memory Voltage and Service Voltage. Phone enters debugmode when tied to +5V at power-up.
08 Out Logic Reference, Status On. Sources over 100mA.
09 Out Data from Mobile Station. Debug messages appear here at 112KBaud when in debug mode.
10 GND Digital Ground and DC return
11 In Data to Mobile Station
12 I/O DC positive for battery charging (in)/DC for extenal accessory powering (out)
All signals seem to be at 5V logic. Most debug messages are text. Like "CB ok!" etc. Debug messages are trailed by 0x0A, 0x0D. Power-up means removal of battery, reconnection of battery, depressure of "NO".
A portable handsfree kit is connected as follows:
Portable Handsfree (directly connected to pins 01, 02, 04):
01 Earphone: 16 Ohm
02 Microphone: <= 2 kOhm
05 to be connected to 04 (GND)

Ericsson KF-768/788
Secret Codes
923885[Menu]  ---  NAM programming
904060[Menu]  ---  Reset phone
904080[Menu]  ---   Title blink
904090[Menu]  ---   TestMode on/off
904059[Menu]   ---  Test Set