Cекретные коды: Alcatel
. Bosch . Ericsson
. LG . Motorola
. Nec . Nokia
. Philips . Sagem
. Samsung . Siemens
. Sony
MOTOROLA - секреты
Motorola StarTac 130
**05* Block Code
**052* PIN2 Code
Motorola 3688 Dual Band
To view IMEI (International Mobile Equipment Identity) number enter *#06#
Enhanced Full Rate Codec (EFR):
To Enable EFR press [][][] 119 [] 1 [] OK.
To Disable EFR press [][][] 119 [] 0 [] OK
Motorola StarTac 6500
#program# Nam Editing
[fnc]**testmode[sto] Enter Test Mode
Motorola 7500, 7820
Activate RBS
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng Field Options' function
with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software. Please report to me what versions
work and which doesn't.
These countries has been reported working:
d460: IT
6200 Flare: UK (Orange), AU
7500: IT (model: F16 HW: 5.2 SW: 2.1)
8200: ES, AU, NL, BE
8400: IT, NL
8700: AU, IT, SG, DE, ES, ZA
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU]
until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press
[OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply
this number by 550, and the result is the distance from the RBS (Radio Base Station),
in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press
[OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This
is the signal quality. If it becomes negative for longer than 5 seconds, a new
cell is selected.
Motorola StarTac 7760
[fnc](SvcCode)(SvcCode)0[rcl]
(default SvcCode=000000) Nam Programming
74663#1[fnc][fnc] Nam1 Programming Mode
79743[fnc][fnc] Enhanced Prefered Scanning
[fnc][fnc]00**testmode[sto] Enter Test Mode
(commands)
2539[sto] A-Key
Motorola 8400, 8700
Activate RBS
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng Field Options' function
with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software. Please report to me what versions
work and which doesn't.
These countries has been reported working:
d460: IT
6200 Flare: UK (Orange), AU
7500: IT (model: F16 HW: 5.2 SW: 2.1)
8200: ES, AU, NL, BE
8400: IT, NL
8700: AU, IT, SG, DE, ES, ZA
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU]
until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press
[OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply
this number by 550, and the result is the distance from the RBS (Radio Base Station),
in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press
[OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This
is the signal quality. If it becomes negative for longer than 5 seconds, a new
cell is selected.
Motorola D160
**04* change pin number
**05* request unblocking code
*#06# displays phone IMEI number
USE OF "SP UNLOCK CARD":
1 plug the SP card in
2 switch the phone on
3 it will take about 10 seconds till you see "clone" in the display
4 press 03#
5 wait 10 seconds
6 shut down the phone, now you can use your Motorola with each provider and the
user lock and security code will be set on factory default.
Tips and Tricks
Motorola CD 160 Tip.
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
The trick can be done on cd160 and cd520 only:
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
4 And finally press the button for power off.
You should now be able to talk without being billed.
Motorola d460/2500/6200
Activate RBS
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng Field Options' function
with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software. Please report to me what versions
work and which doesn't.
These countries has been reported working:
d460: IT
6200 Flare: UK (Orange), AU
7500: IT (model: F16 HW: 5.2 SW: 2.1)
8200: ES, AU, NL, BE
8400: IT, NL
8700: AU, IT, SG, DE, ES, ZA
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU]
until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press
[OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply
this number by 550, and the result is the distance from the RBS (Radio Base Station),
in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press
[OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This
is the signal quality. If it becomes negative for longer than 5 seconds, a new
cell is selected.
Motorola Сервисный режим AMPS/DAMPS/NAMPS телефонов
В этой статье рассматриваются некоторые малоизвестные функции AMPS/NAMPS/DAMPS
телефонов от Motorola, очень вероятно, что они могут понадобиться Вам в жизни.
Заранее предупреждаем, что это сервисные настройки, и работать они могут не на
всех телефонах, так что вы действуете на свой страх и риск.
Проверено на TeleTac250, Profile300e.
Итак: как сломать пароль (например Вы включаете чужой телефон, а он высвечивает
Loc'd и стандартный пароль "123" не подходит):
-включаем телефон
-видим Loc'd
-жмем (FNC)-00**83786633-(STO)-# (вход в сервисный режим) - в итоге должны увидеть
US' -жмем 55# - это настройки пользовательских параметров -жмем несколько раз
* пока не увидим мигающие по очереди 7 и 000000, нули -это системный код который
надо вводить при "легальной" смене пароля
-жмем еще раз * и видим мигающие по очереди 8 (оно нам не надо) и трехзначное
число - пароль, которое нам и нужно
-теперь можно выключить телефон, а при включении набрать тот самый код из трех
цифр!!!
Общий сброс телефона, может понадобиться например при продаже телефона:
-включаем телефон
- жмем (FNC)-00**83786633-(STO)-# (вход в сервисный режим) - в итоге должны увидеть
US'
-давим 32# (нужно ждать пока не пикнет или не перезагрузится),
-сбрасываются все таймеры, все телефонные книги, все настройки возвращаются в
состояние по умолчанию;
настройки вашего оператора ессно останутся (телефон резетится около минуты)...
Motorola 5200, 7200, 7500 Pin-Out
Motorola 5200, 7200, 7500 Pin-Out
Numbered right to left, keypad up, battery down looking
1) Gnd
2) Pos
3) True data (TD) (input)
4) Complimentary data (CD) (input)
5) Return data (RD) (output)
6) Audio gnd
7) Audio out
8) Audio in
Motorola 6200, 8200, 8400 Pin-Out
Numbered left to right, keypad up, battery down
1) Audio Ground
2) V+
3) True data (TD) (input)
4) Downlink - Complimentary data (CD) (input)
5) Uplink - Return data (RD) (output)
6) GND
7) Audio Out - on/off
8) Audio In
9) Manual Test - ???
10) Battery Feedback
11) Antenna connector
Tips and Tricks UPDATED / NEW
Motorola 920/930:
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the
phone number used for with this key when speed dialing.
|
